![]() What kinds of angles your printer can produce smoothly can be determined using Thingiverse’s Massive Overhang Test. Let’s start by looking at a typical model that can be used to determine the kinds of overhang angles your printer can handle. The edges of your layer may start to deform if you use steeper overhang angles at that point, you might want to add support material to the part. Most of the plastic layer is supported by the layer below it at these shallow angles. Because there is nothing to support the molten plastic as it is extruded out of the nozzle, if you tried to print this arch without support material, you might notice that the top layers of the arch appear to sag and droop.Īs a general rule, extrusion-based printers can typically support less than 45 degrees of overhang angles. For instance, if you printed an arch, the center of the arch might need support material because nothing would support the top layer from below when your printer tried to print it. When models have pronounced overhangs or unsupported regions, supports are used. ![]() The supports are built as a network of connected pieces so they can be removed from your model easily, despite appearing as individual pillars in the software. The Support Generation Tool makes adding, moving, and removing supports simple. These frail, breakaway structures support your model’s cantilevered and steep overhanging portions. ![]() This tutorial will cover all the information you require about support structures.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |